APC-60HF is the newest model of the professional digital control plasma
cutting machine with built-in advanced inverter technology. Its high-quality
design was manufactured in accordance with industrial level standards. The
machine has a high-cutting performance and is very user-friendly with a
beautiful appearance and exquisite production technology. The instrument and
air pressure regulator are installed inside the machine on the panel, making it
more convenient and easier to use. The air filter is installed in the machine
and is controlled automatically by a solenoid valve, which greatly improves the
work efficiency. The normal cutting thickness of APC-60HF air plasma cutting
machine is 1.0 inch, and the maximum cutting thickness is 1.2 inches.
v
APC-60HF
incorporates
the most advanced IGBT inverter technology and non-
touch pilot
arc
cutting process
es
,
resulting in
excellent arc stability.
The cutting effect is very ideal and
can finish the work effortlessly and quickly, regardless if the material is
very rough, rusty, greasy, dirty, spray painted, etc.
The l
ightweight model design
makes the machine
very convenient to carry
anywhere
.
v
APC-60HF
can achieve perfect cutting, and the strength of its components makes it a
reliable work tool for professionals or individuals.
Can cut up to 1.
0
in.
stainless steel, alloy
steel, low
–
carbon
steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other
conductive metals
, resulting in
straight cuts, angles, holes, curves,
notches, slots, circles, v-grooves, and many others in minutes.
v
APC-60HF is an
intelligent power supply system. The automatic selection function can
automatically detect the input voltage, so that you can easily use it in of 90V
to 300V, and the machine will automatically adjust it. It is designed for
demanding industrial work and construction and simple tasks around houses. With
less work, you can achieve better results overall with sharper cuts.
v
80% duty cycle can
ensure long-term
and efficient
cutting
.
NPT 1/4 inch industrial D-type coupler
can
easily and quickly
connect
to the air compressor
.
Extending the power cord by
700 feet can also resist power fluctuations and cable attenuation
;
the machine can still work
normally. It is fully suitable for difficult operations in construction sites,
ship docks, agricultural sites, and relatively remote areas.
v
APC-60HF is
designed with multiple safety and protection functions, such as automatic
compensation for voltage fluctuations, over-heating protection, over-current
protection, over-loading protection, plasma torch gun safety protection, etc.
The fan with automatic temperature
control allows the machine to run very quietly.
Specifications:
Type:
Non-touch Pilot
Arc
Plasma Cutter
Supply Power: AC 90V-300V, 50Hz/60Hz, 1-Phase
Rated Input Current: 230V/46 Amp, 115V/55 Amp
Cutter Current Range: 230V/20-60 Amp, 115V/20-50 Amp
Nominal DC Open Circuit Voltage: 265-Volt
Output Voltage: 104-Volt
Duty Cycle @ 104F(40c): 60% @ 60 Amp
Efficiency: 85%
Power factor: 0.93
Output Terminal Type: Direct Wire
Cooling Method: Fan Air Cooled
Gas Supply
:
Clean
D
ry
O
il-
F
ree
A
ir
Gas
Pressure
Range
:
30
–
80
psi
Recommended Gas Inlet Flow
:
5.5scfm @
80
psi
Standard
Severance Cutting Thickness: 1.
0
in.
Maximum Severance Cutting Thickness:
1.2 in.
Movement
Speed: 15.0 in./min
Net Weight: 30.0 lbs.
Product Size:
20.0
x
8.7
x
15.7
in.
Package Weight: 42.0 lbs.
Shipping Size: 2
2
.0 x 13.
0
x 16.5
in.
Package
Included:
APC-60HF
Non-touch
Pilot Arc
Plasma
Cutter Machine.
AP-80 13-Feet / 80-Amp Plasma Torch Gun Assembly.
10-Feet 300A Work Clamp Assembly, 35-50mm Lead Dines.
230V
to 115V Power Adapter.
Air
Filter and Pressure Gage (Installed inside the machine).
Owner’s
Manual.